Home / Google Pixel 10 Pro / Recovery Mode

How to Recovery Mode — Google Pixel 10 Pro

Recovery ModeAndroid 16

How to Recovery Mode — Google Pixel 10 Pro

⏱ ~5 min📋 6 steps

The Google Pixel 10 Pro is a 2025 Android 16, up to 7 major Android upgrades smartphone powered by the Google Tensor G5 (3 nm) with 16GB and 128GB | 1TB | 256GB | 512GB internal storage. It features a 6.3", LTPO OLED, 120Hz, HDR10+, 2200 nits (HBM), 3300 nits (peak), 1280.0x2856.0 display and is available in Moonstone, Jade, Porcelain, Obsidian.

The Pixel 10 Pro is equipped with a Li-Ion 4870 mAh, a 50 MP, 8K@30fps (via cloud-based upscaling), 4K@24/30/60fps, 1080p@24/30/60/120/240fps; gyro-EIS, OIS, 10-bit HDR main camera, a 42 MP, 4K@30/60fps, 1080p@30/60fps front camera. The device uses a · Nano-SIM + eSIM · eSIM + eSIM (8 or more, max 2 at a time; USA) configuration. It weighs 207 g.

Recovery Mode on the Google Pixel 10 Pro is a special bootable partition that operates independently from the main Android system. It allows you to perform advanced operations including cache wipes, factory resets, and software repairs even when the phone cannot boot normally. Access it carefully as some options will erase all data.

💡

Used for cache wipes, factory resets, and advanced repairs.

1

Power off Google Pixel 10 Pro

2

Hold Volume Down + Power until Fastboot appears

3

Navigate to 'Recovery mode' — press Power

4

If 'No command': hold Power, tap Volume Up

5

Navigate with Volume, confirm with Power

6

To exit: select 'Reboot system now'

Was this guide helpful?