Home / Huawei Pura 90 Pro Max / Recovery Mode

How to Recovery Mode — Huawei Pura 90 Pro Max

Recovery ModeHarmonyOS 6.1

How to Recovery Mode — Huawei Pura 90 Pro Max

⏱ ~5 min📋 4 steps

The Huawei Pura 90 Pro Max is a 2026 HarmonyOS 6.1 smartphone powered by the Kirin 9030S with 12GB | 16GB and 1TB | 256GB | 512GB internal storage. It features a 6.9", LTPO OLED, 1B colors, 120Hz, PWM, HDR Vivid, 1308.0x2880.0 display and is available in Black, Gold, Green, Orange, Purple.

The Pura 90 Pro Max is equipped with a Li-Po 6000 mAh, a 50 MP, 4K, 1080p, 1080p@960fps (interpolated), HDR Vivid, gyro-EIS, OIS main camera, a 13 MP, 4K, 1080p, 1080p@240fps, HDR Vivid, gyro-EIS front camera. The device uses a Nano-SIM + Nano-SIM + eSIM + eSIM (max 2 at a time) configuration. It weighs 230.5 g.

Recovery Mode on the Huawei Pura 90 Pro Max is a special bootable partition that operates independently from the main Android system. It allows you to perform advanced operations including cache wipes, factory resets, and software repairs even when the phone cannot boot normally. Access it carefully as some options will erase all data.

💡

Used for cache wipes, factory resets, and advanced repairs.

1

Power off Huawei Pura 90 Pro Max

2

Hold Volume Down + Power until Recovery appears

3

Navigate with Volume, confirm with Power

4

To exit: select 'Reboot system now'

Was this guide helpful?