Home / Samsung Galaxy XCover Pro / Fix Bootloop

How to Fix Bootloop — Samsung Galaxy XCover Pro

Fix BootloopAndroid 10

How to Fix Bootloop — Samsung Galaxy XCover Pro

⏱ ~5 min📋 6 steps

The Samsung Galaxy XCover Pro is a 2020 Android 10, upgradable to Android 13, One UI 5 smartphone powered by the Exynos 9611 (10 nm) with 4GB and 64GB internal storage. It features a 6.3", IPS LCD, 1080.0x2340.0 display and is available in Black.

The Galaxy XCover Pro is equipped with a Li-Po 4050 mAh, removable, a 25 MP, 1080p@30fps main camera, a 13 MP, 1080p@30fps front camera. The device uses a · Nano-SIM · Nano-SIM + Nano-SIM configuration. It weighs 218 g.

A bootloop on the Samsung Galaxy XCover Pro occurs when the device repeatedly restarts without fully loading Android. This is commonly caused by a failed software update, corrupted system files, or an incompatible app. Most bootloops can be resolved without losing data by clearing the cache partition first before attempting a factory reset.

Factory reset may be needed as a last resort — erases all data.

1

On your Samsung Galaxy XCover Pro: force restart: hold Power for 15–30 seconds

2

If still looping: enter Recovery Mode

3

Navigate to 'Wipe cache partition' → confirm → reboot

4

If still looping: return to Recovery

5

Select 'Wipe data/factory reset' → confirm (erases all data)

6

Last resort: use Samsung Smart Switch on a PC to reinstall firmware

Was this guide helpful?