Home / Cubot A1 / Fix Black Screen
How to Fix Black Screen — Cubot A1
How to Fix Black Screen — Cubot A1
The Cubot A1 is a 2024 Android 13 smartphone powered by the Unisoc SC9863A (28 nm) with 4GB and 128GB internal storage. It features a 6.6", IPS LCD, 720.0x1612.0 display and is available in Black, Blue, Green.
The A1 is equipped with a 5100 mAh, a 13 MP, Yes main camera, a 8 MP front camera. The device uses a Nano-SIM + Nano-SIM configuration. It weighs 205 g.
A black screen on the Cubot A1 can occur due to a drained battery, a software crash, or the screen becoming unresponsive. In most cases this can be resolved with a force restart or a short charging period without any data loss. Follow the steps below in order before considering a factory reset.
On your Cubot A1: charge for 30+ minutes with a different cable and charger
Hold Power for 15–20 seconds
If still black: hold Power + Volume Down for 10 seconds
Try holding Power + Volume Up to enter Recovery Mode
In Recovery: select 'Reboot system now'
If Recovery loads: wipe cache partition then reboot
Last resort: factory reset from Recovery — erases all data
Was this guide helpful?