Home / Motorola Moto X50 Ultra / Recovery Mode

How to Recovery Mode — Motorola Moto X50 Ultra

Recovery ModeAndroid 14

How to Recovery Mode — Motorola Moto X50 Ultra

⏱ ~5 min📋 6 steps

The Motorola Moto X50 Ultra is a 2024 Android 14 smartphone powered by the Qualcomm SM8635 Snapdragon 8s Gen 3 (4 nm) with 12GB | 16GB and 1TB | 256GB | 512GB internal storage. It features a 6.7", P-OLED, 1B colors, 144Hz, HDR10+, 2500 nits (peak), 1220.0x2712.0 display and is available in Forest Grey, Nordic Wood, Peach Fuzz.

The Moto X50 Ultra is equipped with a 4500 mAh, a 50 MP, 4K@30/60fps, 1080p@30/60/120/240/960fps, 10-bit HDR10+, gyro-EIS main camera, a 50 MP, 4K@30/60fps, 1080p@30/60/120fps, HDR front camera. The device uses a Nano-SIM + Nano-SIM configuration. It weighs 197 g.

Recovery Mode on the Motorola Moto X50 Ultra is a special bootable partition that operates independently from the main Android system. It allows you to perform advanced operations including cache wipes, factory resets, and software repairs even when the phone cannot boot normally. Access it carefully as some options will erase all data.

💡

Used for cache wipes, factory resets, and advanced repairs.

1

Power off Motorola Moto X50 Ultra

2

Hold Volume Down + Power until Fastboot appears

3

Navigate to 'Recovery mode' — press Power

4

If 'No command': hold Power, tap Volume Up

5

Navigate with Volume, confirm with Power

6

To exit: select 'Reboot system now'

Was this guide helpful?