Home / Tecno Spark Go 1 / Fix Black Screen
How to Fix Black Screen — Tecno Spark Go 1
How to Fix Black Screen — Tecno Spark Go 1
The Tecno Spark Go 1 is a 2024 Android 14 smartphone powered by the Unisoc T615 (12 nm) with 3GB | 4GB and 128GB | 64GB internal storage. It features a 6.7", IPS LCD, 120Hz, 720.0x1600.0 display and is available in Startrail Black, Glittery White.
The Spark Go 1 is equipped with a 5000 mAh, a 13 MP, 1080p@30fps main camera, a 8 MP front camera. The device uses a Nano-SIM + Nano-SIM configuration.
A black screen on the Tecno Spark Go 1 can occur due to a drained battery, a software crash, or the screen becoming unresponsive. In most cases this can be resolved with a force restart or a short charging period without any data loss. Follow the steps below in order before considering a factory reset.
On your Tecno Spark Go 1: charge for 30+ minutes with a different cable and charger
Hold Power for 15–20 seconds
If still black: hold Power + Volume Down for 10 seconds
Try holding Power + Volume Up to enter Recovery Mode
In Recovery: select 'Reboot system now'
If Recovery loads: wipe cache partition then reboot
Last resort: factory reset from Recovery — erases all data
Was this guide helpful?