Home / vivo X300 Ultra / Recovery Mode

How to Recovery Mode — vivo X300 Ultra

Recovery ModeAndroid 16

How to Recovery Mode — vivo X300 Ultra

⏱ ~5 min📋 4 steps

The vivo X300 Ultra is a 2026 Android 16, OriginOS 6 smartphone powered by the Qualcomm SM8850-AC Snapdragon 8 Elite Gen 5 (3 nm) with 12GB | 16GB and 1TB | 256GB | 512GB internal storage. It features a 6.8", LTPO AMOLED, 1B colors, 144Hz, 2160Hz PWM, Dolby Vision, HDR10+, HDR Vivid, 1440.0x3168.0 display and is available in Eclipse Black, Victory Green, Silver.

The X300 Ultra is equipped with a Si/C Li-Ion 6600 mAh (International) or 6400 mAh (Europe), a 200 MP, 8K@30fps, 4K@24/30/60/120fps (10-bit Log, Dolby Vision HDR), 1080p@30/60/120/240fps, gyro-EIS, HDR10+ main camera, a 50 MP, 4K@30/60fps, 1080p@30/60fps, gyro-EIS, HDR front camera. The device uses a · Nano-SIM + Nano-SIM + eSIM (max 2 at a time) · Nano-SIM + Nano-SIM configuration. It weighs 232 g.

Recovery Mode on the vivo X300 Ultra is a special bootable partition that operates independently from the main Android system. It allows you to perform advanced operations including cache wipes, factory resets, and software repairs even when the phone cannot boot normally. Access it carefully as some options will erase all data.

💡

Used for cache wipes, factory resets, and advanced repairs.

1

Power off vivo X300 Ultra

2

Hold Volume Down + Power until Recovery appears

3

Navigate with Volume, confirm with Power

4

To exit: select 'Reboot system now'

Was this guide helpful?