Home / Wiko Fever SE / Fix Black Screen
How to Fix Black Screen — Wiko Fever SE
How to Fix Black Screen — Wiko Fever SE
The Wiko Fever SE is a 2016 Android 6.0 smartphone powered by the Mediatek MT6753 (28 nm) with 3GB and 32GB internal storage. It features a 5.2", IPS LCD, 1080.0x1920.0 display and is available in Silver, Anthracite, Lime, Cinnabar, Ash Wood, Oak Wood.
The Fever SE is equipped with a Li-Po 2900 mAh, non-removable, a 13 MP, 1080p@30fps main camera, a 5 MP, 1080p@30fps front camera. The device uses a Dual SIM (Micro-SIM, dual stand-by) configuration. It weighs 150 g.
A black screen on the Wiko Fever SE can occur due to a drained battery, a software crash, or the screen becoming unresponsive. In most cases this can be resolved with a force restart or a short charging period without any data loss. Follow the steps below in order before considering a factory reset.
On your Wiko Fever SE: charge for 30+ minutes with a different cable and charger
Hold Power for 15–20 seconds
If still black: hold Power + Volume Down for 10 seconds
Try holding Power + Volume Up to enter Recovery Mode
In Recovery: select 'Reboot system now'
If Recovery loads: wipe cache partition then reboot
Last resort: factory reset from Recovery — erases all data
Was this guide helpful?