Home / Motorola Edge 40 Neo / Recovery Mode

How to Recovery Mode — Motorola Edge 40 Neo

Recovery ModeAndroid 13

How to Recovery Mode — Motorola Edge 40 Neo

⏱ ~5 min📋 6 steps

The Motorola Edge 40 Neo is a 2023 Android 13, up to 2 major Android upgrades smartphone powered by the MediaTek Dimensity 7030 (6 nm) with 12GB | 8GB and 128GB | 256GB internal storage. It features a 6.5", P-OLED, 1B colors, 144Hz, HDR10+, 1300 nits (peak), 1080.0x2400.0 display and is available in Black, Soothing Sea, Caneel Bay, Peach Fuzz.

The Edge 40 Neo is equipped with a Li-Po 5000 mAh, a 50 MP, 4K@30fps, 1080p@30/60/120/240fps, gyro-EIS main camera, a 32 MP, 4K@30fps, 1080p@30fps front camera. The device uses a · Nano-SIM + eSIM · Nano-SIM + Nano-SIM configuration. It weighs 170 g.

Recovery Mode on the Motorola Edge 40 Neo is a special bootable partition that operates independently from the main Android system. It allows you to perform advanced operations including cache wipes, factory resets, and software repairs even when the phone cannot boot normally. Access it carefully as some options will erase all data.

💡

Used for cache wipes, factory resets, and advanced repairs.

1

Power off Motorola Edge 40 Neo

2

Hold Volume Down + Power until Fastboot appears

3

Navigate to 'Recovery mode' — press Power

4

If 'No command': hold Power, tap Volume Up

5

Navigate with Volume, confirm with Power

6

To exit: select 'Reboot system now'

Was this guide helpful?